sta008004.png
{Page 1}
sta008004.png
{Page 2}
sta008004.png
{Page 3}
sta008004.png
{Page 4}
sta008004.png
{Page 5}
Like grid beams, purlins and cross members , with the macro menu, multi-element placement can be made , the connection details can be prepared automatically. Likewise, the deck plate can be formed with the similar menu system.

Technical Specifications of Software

STA- Steel , 3 -dimensional finite elements static and dynamic analysis , to the steel structure design, will bring a new vision as an integrated software package . Sta-Steel , at the industrial buildings, beside the economic structure design , with analysis and drawing with all the details will cause the production of qualified projects in our country and around the world and will open the way for steel structures . The software is being developed to design hall -type industrial structures , multi-storey steel frame structures also .Analysis and design of steel structures is done according to the behaviour and to its own properties of steel structures.
As well in STA4 - CAD , advanced analysis techniques are used in sta-steel such as the rigidity which obtained from micro-analysis being used at macro analysis , Structural element’s end details deformations which obtained from the finite element analysis , are being taken into account at the overall structure solution . The more delicate structure of the steel structures, compared to the reinforced concrete, for economic solutions, the actual behavior of the stucture must be taken into account in the calculations.In order to have economy , modelling and optimization of structures are very important.
Every industrial type of structures , including hall type or with crane can be designed.Sta steel is being developed as can be designed such as Multi-story steel and concrete composite structures.
With the assistance of structure wizard , the typical projects will be quickly produced and easily corrected so the structure design can be made in a shorter time.While pre-optimizations are being made , economic structural project will be produced with the most suitable design. Using the library of available profiles , in the solid model data entry , the element’s intersection and contacts are being detected automatically. It is being aimed to support standards such as TS648, Eurocode3 and ASTM. At the data input editor structural elements and non-structural elements such as coatings, will be provided complete automation of entering the design.
Acoording to the total loads included in the calculations , at the static and dynamic analysis , all interactions are taken into account by the software. 50000 unknowns equations can be solved in 6 seconds , this speed causes elastic effects of fixed end is obtained by calculating with finite shell element analysis . Only bearing pulling tension elements like a cross (GAP) after iterative solution, the static results are obtained . Floor plates or horizontal platform rigidity ,with finite element analysis and the elastic diaphragms are taken into account in the calculations.
All elements including coatings are being analyzed according to their weight and carrying capacity.Steel members with load contact are taken into account in the calculations. Constructional elements such as railings are ignored except their weights in structural analysis. Coatings and the tensile members are included in the calculations.
sta017005.png sta017004.png sta017003.png sta001003.jpg sta001002.jpg
STA Steel
STA4-CAD
30 years in the software engineering.